A Flawed Casting Stroke: Is Your Rod To Blame?

 

by John Juracek

 

As a casting instructor, I’ve been privileged to witness and analyze pretty much every kind of flycasting flaw imaginable. Those flaws most in need of correction are typically self-induced, for a variety of reasons. But not every one. Not entirely, anyway. While each of us must accept responsibility for the shape of our own casting strokes, our rods can play a harmful role. Here’s a flaw not always of our own making: A casting stroke which is too long for the length of line being cast.

 

It may be hard to visualize what that means. Try this: Have you ever made a cast that ended with a really wide loop? How about one where your line and leader failed to straighten, especially when trying to summon an extra few feet of distance? When casting into a breeze, have your leader and fly ever been blown back at you? Answering yes to any of these questions means you’ve experienced the consequences of a casting stroke which is too long for the length of line being cast.

 

The rule of thumb for stroke length is this: Short line, short stroke. Longer line, longer stroke. Exactly how short or long depends on your individual physical makeup. But you’ll always know what’s right if you understand the clues your line provides. A stroke of the correct length (along with proper acceleration) straightens your line perfectly, always with a tight loop. A stroke that’s too long— easily the most common casting fault—results in the problems mentioned above. A stroke that’s too short causes the loop to crash-land before it can straighten out.

 

No one I know sets out to intentionally use a stroke which is too long. So it’s only natural to ask, why does it happen? There are several reasons. It can happen to beginning and intermediate casters when their strokes contain other fundamental flaws. It can happen to every level of caster when they tire. A third reason—the most insidious, by far—is because your rod encourages it.

 

Every cast requires a certain amount of energy. While that energy originates with the caster, the rod contributes by storing and returning to the cast a portion of the energy imparted to it. (When a rod bends, it stores energy. When it straightens, that stored energy is released.) Rods that resist bending—think of today’s typical fast-action rod—require a quicker, more powerful stroke in order to cast them.

 

If a fly rod taxes our strength and quickness, our fundamentals tend to quickly erode. Typically, our arm travels too great a distance as we try to impart the necessary work. Sometimes our wrists bend too much. Often, it’s a combination of both of these. The net result is a stroke which is too long, with all its attendant problems. This is an extremely common problem for saltwater anglers, as they struggle to make their rods load. But freshwater fishermen experience the same thing—even with line weights as light as five—if their rods are overly stiff. It’s especially noticeable after a full day’s fishing.

 

I’m not suggesting that fast-action rods are inherently bad. Stiffness is relative. Owing to physical differences among us, a rod that’s too stiff for one person might, in the hands of another, be made to work just fine. But even for the strongest of casters, many modern rods push hard the boundaries of acceptable stiffness. Too hard, in my estimation. They encourage the development of casting flaws. None of us need that.

 

When you’re considering purchasing a new rod, caveat emptor. After all, your casting stroke is a valuable asset. Train it well. Treat it well. And make sure your fly rod does the same.

Sign up for our newsletter

Copyright 2024 Blue Ribbon Flies - Powered by Lightspeed